What the GRIP 5D SR Solves on Set
When you are shooting with a Canon 5D SR or 5D Mark III on a long day or a multi-camera setup, battery swaps interrupt your rhythm. The Matphoto GRIP 5D SR is a dedicated battery grip that replaces the standard battery compartment and gives you a single housing for two LP-E6 batteries. That means you stay on set longer without reaching for spares.
This guide covers what the rental includes, how the grip fits your camera, and what to check before you book.
Rental Facts from the Matphoto Listing
- GRIP 5D SR: Compatible with Canon 5D SR and 5D Mark III. This grip is not universal. It fits only those two Canon bodies, so confirm your camera model before adding it to your rental cart.

GRIP 5D SR - GRIP 5D SR: Houses two LP-E6 batteries. You can load a pair of LP-E6 batteries into the grip, effectively doubling your shooting time between swaps. The grip draws power from both batteries simultaneously.
- GRIP 5D SR: Battery grip design extends shooting duration. The grip adds a vertical handgrip section with shutter and control buttons, improving handling for vertical shots and low-angle work.
Checking Compatibility Before You Book
The GRIP 5D SR works with the Canon 5D SR and 5D Mark III. If you are renting a different Canon body, the grip will not attach or communicate with the camera. Also note that the grip uses LP-E6 batteries. If your kit uses LP-E6N or other Canon batteries, they should fit the same housing, but confirm with the rental desk that the grip accepts your specific battery model.
Because this is a rental item, inspect the grip for any damage to the battery contacts or the latch mechanism before you leave the store. A worn latch can cause intermittent power loss on set.
Setting Up the GRIP 5D SR
The grip attaches directly to the camera's battery compartment. Follow these general steps; always refer to the manufacturer instructions included with your rental.
- Remove the standard battery door: Slide the battery door release on your Canon 5D SR or 5D Mark III and remove the door. Keep it in a safe place.
- Insert two LP-E6 batteries: Open the grip's battery compartment and insert two LP-E6 batteries, observing the polarity markings. Close and latch the cover securely.
- Attach the grip to the camera: Align the grip's mounting plate with the camera's battery slot and slide it into place until you hear a click. The grip should feel solid with no wobble.
- Power on and test: Turn on the camera. The grip should supply power immediately. Test the grip's shutter button and control dials to confirm they are functional.
Pre-Booking Checks for Your Rental
Before you reserve the GRIP 5D SR, confirm that your rental package includes the grip body and that you are responsible for supplying the LP-E6 batteries. Some rental houses offer batteries as an add-on; others expect you to bring your own. Also verify that the grip comes with its original packaging or a padded case to prevent damage during transport.
The Honest Trade-Off
The GRIP 5D SR adds weight and bulk to your camera, which can be a drawback for handheld gimbal work or compact travel kits. It is best suited for studio, tripod, or shoulder-rig shooting where the extra battery life and improved vertical handling justify the size. For run-and-gun shoots, a single battery in the body might be more practical.


