Terug naar blog
Handleidingen 2026-11-20 Matphoto 0 weergaven

K5600 Bug-A-Beam with Source Four: Rental Setup Guide

K5600 Bug-A-Beam with Source Four: Rental Setup Guide

Learn how to set up and use the K5600 Bug-A-Beam with Source Four 25-50° lens on a Joker 400W or 800W fixture. Rental tips and beam angle adjustments covered.

What the Bug-A-Beam Solves on Set

The K5600 Bug-A-Beam with Source Four 25-50° is a rental accessory that turns a Joker 400W or 800W HMI fixture into a focused, controllable spotlight. Instead of a broad flood, you get a sharp beam that can be shaped with standard Source Four lenses and accessories. This makes it a practical choice for simulating sunlight, projecting gobos, or adding a hard accent light on a film or photo set.

What the Matphoto Rental Listing Confirms

  • K5600 BUG-A-BEAM ET SOURCE FOUR 25-50° POUR JOKER: The K5600 Bug-A-Beam Source Four 25-50° is a rental accessory designed for use with Joker 400W and 800W fixtures. You must have a compatible Joker fixture to use this accessory. It does not work with other HMI brands or lower-wattage Joker models.
    K5600 BUG-A-BEAM ET SOURCE FOUR 25-50° POUR JOKER
    K5600 BUG-A-BEAM ET SOURCE FOUR 25-50° POUR JOKER
  • K5600 BUG-A-BEAM ET SOURCE FOUR 25-50° POUR JOKER: Beam angle range of 25-50°. The adjustable zoom lets you go from a tighter spot to a wider wash without changing lenses. This flexibility saves time during a shoot.
  • K5600 BUG-A-BEAM ET SOURCE FOUR 25-50° POUR JOKER: Listed under HMI continuous light accessories in the rental category. It is a continuous light accessory, not a flash modifier. Expect constant output suitable for video and stills with HMI fixtures.

Setting Up the Bug-A-Beam with Source Four Lens

Follow these steps to attach and adjust the Bug-A-Beam on a Joker 400W or 800W. Always power off and let the fixture cool before making any changes.

  1. Mount the Bug-A-Beam on the Joker fixture: The Bug-A-Beam attaches to the front of the Joker 400W or 800W head. Ensure the mounting ring is secure before adding the lens.
  2. Attach the Source Four 25-50° lens: Slide the Source Four lens into the Bug-A-Beam's lens holder. It locks into place with the standard Source Four retention mechanism.
  3. Adjust the beam angle: Turn the zoom ring on the Source Four lens to change the beam spread between 25° (narrow) and 50° (wide). Lock the ring when you have the desired coverage.
  4. Power on and test: Restore power to the Joker fixture and ignite the lamp. Check the beam pattern on a wall or subject. Adjust the zoom or reposition the light as needed.

Pre-Booking Checks for Your Rental

Before you book the K5600 Bug-A-Beam with Source Four 25-50°, confirm with Matphoto that the rental includes the lens and any necessary mounting hardware. The listing does not specify whether the Joker fixture itself is part of the rental, so ask if you need it separately. Also verify that the lens is free of scratches or damage that could affect light quality.

Gerelateerde artikelen

Customer Service
Home
Producten
Winkelwagen
Profiel